Monday, 30 November 2009

Christmas is coming



Christmas is coming

Tutorial written by and © to Bits N Bobs 30th November 2009.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.

Font of choice for your name.
I am using Christmas Card
Scrap kit Vintage Christmas by Mystic Creations 
Poser tube is from the scrap kit.

Scraps I am using from this kit are
MCVCDoiley1, MCVCTree1, MCVCCuteElf, MCVCGift04, MCVCGift05, MCVCGift09, MCVCPaper1, MCVCPaper3
Mask of choice.
I am using
Mask - gabeemask33-vi.jpg
This tutorial was written in PSP 9

Note
Open all the supplies in paintshop except the font.
Double click on your font and minimize.

1.  Open a new image 500 x 500 at 72 dpi
Re-size element MCVCDoiley1 to 400 pixels high, copy, paste as a new layer on your new image.
Using your Raster deform tool push the top centre down so it is just under half the original size.
Position slighty to the right hand side. This will now be our rug.
Add drop shadow, settings will remain the same throughout.
 V 3, H 3, O 100, B 9.00, Colour # 000000

2. Re-size element MCVCTree1 to 300 pixels high, copy paste as a new layer,
position to the left of the rug, add drop shadow.

3.  Re-size element MCVCCuteElf to 200 pixels wide, copy, paste as a new layer, position and add a drop shadow.

4.  Re-size element MCVCGift04, to 100 pixels wide, copy, paste as a new layer, position and add a drop shadow.
Repeat this step for MCVCGift05, and MCVCGift09

5.  Re size MCVCPaper1 to 500 pixels high, copy,  paste as a new layer
Layers/ arrange/ send to bottom.

6.  Layers/ new mask layer/ from image, find your mask, invert un-tabbed.
Layers/ merge/ merge group layers, add a dopr shadow.

7.  Re-size MCVCPaper3 to 500 pixels high, copy,  paste as a new layer
Layers/ arrange/ send to bottom.
Lower layer opacity to 60%
Layers/ merge/ merge all ( flatten )

8. Add any copyright info, name, export as a jpg and save .

Sunday, 22 November 2009

Mary Christmas *


Mary Christmas

Tutorial written by and © to Bits N Bobs 22nd November.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.

Font of choice for your name.
I am using Kingthings wrote
Tube of  choice.
I am using Mary Christmas by Ismael Rac
This tube is not to be used without an AMI
Scrap kit Christmas Wishes by Dites Haven
Items used from this kit are....
Star wire 4, Wreath frame 3,

Note
This tutorial was written in PSP 9
Open all the supplies in paintshop except the font.
Double click on your font and minimize.

1.  Open a new image 500x500 at 72 dpi.
Re-size star wire 4 to 450 pixels high, copy, paste as a new layer.
Add a drop shadow, settings will remain the same.
V2, H2, O100, B9.00, Colour #000000

2.  Re-size wreath frame 3 to 350 pixels high, copy, paste as a new layer.
Position in the center of the star.

3. Activate the wreath frame layer, copy your larger tube, paste as a new layer.
Selections/ select all, selections/ float/ defloat.
Activate the wreath frame layer and erase the top part so your tubes head pops out.
Selections/ select none.
Activate tube layer and erase the bottom part hanging from the bottom of the frame.
Add a drop shadow.

4. Add your copyright info and name and export png for a transparent fiile or as jpg for a white background .

Merry Christmas Baby



Merry Christmas baby

Tutorial written by and © to Bits N Bobs 22nd November.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Kingthings wrote
Tube of  choice.
I am using Bed Time by Ismael Rac
This tube is not to be used without an AMI license
Scrap kit by Bits N Bobs at AMI - Christmas is coming
Items used from this kit are.
Paper 3, Element 14, Element 3,

Note
This tutorial was written in PSP 9
Open all the supplies in paintshop except the font.
Double click on your font and minimize.

1.  Re-size paper 3 to 500 pixels wide.
Re-size element 14 to 450 pixels high.
Copy, paste as a new layer at the top of the paper.
Duplicate layer twice and position each one to your liking.

2.  Activate the paper layer, copy element 3, paste as a new layer.

3. Activate the top layer, copy your larger tube, paste as a new layer add a drop shadow.
I am using V4, H4, O100, B9.00, C #000000
Image re-size ( all layers tabbed ) to 450 pixels wide.

4.  Image/ add border ( if you get a pop up asking to merge to a flattened image click yes ) / Top 3, Symmetric tabbed, Colour #800000
Image/ add border/ Top 5, Symmetric tabbed, Colour #efe8de
Image/ add border/ Top 3, Symmetric tabbed, Colour #800000
Image/ add border/ Top 9, Symmetric tabbed, Colour #e1d5c5
Image/ add border/ Top 5, Symmetric tabbed, Colour #800000

5. Add your copyright info and name and export as jpg for a white background .

Monday, 9 November 2009

Wrapped for Christmas


Wrapped for Christmas

Tutorial written by and © to Bits N Bobs 9th November.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Santas big secret
Tube of  choice.
I am using sexy gift by Ismael Rac 
This tube is not to be used without an AMI license
Scrap kit Christmas is coming by Bits N Bobs at AMI,
not to be used without an AMI license
Items I am using from this kit are ....
Frame 1,  Paper 1,

Note
This tutorial was written in PSP 9
Open all the supplies in paintshop except the font.
Double click on your font and minimize.

1. Re-size frame 1 to 400 pixels wide, copy and paste as a new layer onto your new image.

2. Re-size paper 1 to 330 pixels wide, copy, paste as a new layer, layers/ arrange, move down.

3. Re-size your tube to 400 pixels high, copy, paste as a new layer.
Selections/ select all, Selections/ float, Selections/ defloat.
Activate your frame layer and erase the parts over your tubes head and extended leg so it pops out of the frame.
Selections/ select none.
Activate tube layer and erase any part hanging out the bottom of the frame.

4. Re-size element 22 to 420 pixels wide, copy, paste as a new layer.
Add a drop shadow of your choice.
I use V 2, H 3, O 100, B 5.00, Colour #000000

5. Activate tube layer and add drop shadow.
I use V 2, H 3, O 100, B 5.00, Colour #000000
Activate frame layer and add drop shadow.
I use V 2, H 3, O 100, B 5.00, Colour #000000

6. Layers/ merge/ merge visible.
Add your copyright info and name and export as a png for transparent background or jpg for a white background .