All For Love
Tutorial written by and © to Bits N Bobs 28th January 2012.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Bickley Script Plain
Tube of  choice.
I am using one by Carlos Diez
Mine is CO0017 available at UpYourArt
Tube is not to be used without the correct licence.
Mask by essex girl available here
Scrap kit 'All For Love' by Bits N Bobs
From this kit I am using...
AFLpaper3, AFL17, AFL23, AFL43, AFL54, AFL60,
Plugins needed.
You can do this without this plugin.
 Xero Fritilliary under freeware you want the full 40 plugin pack.

Note
This tutorial was written in PSP 9.
Open all supplies in paintshop except the font.
Double click on your font and minimize.

1.Open a new image  550 x 550 and 72dpi.
Re-size your paper to 550 pixels,
copy and paste as a new layer on your new image.
Layers/ Load/save mask/ from disk
Layers/ merge group.


2.Activate AFL-23, image/ mirror.
Copy and paste as a new layer onto your working image.
Re-size to 350 pixels all layers untabbed.
With your magic wand select the center of both hearts.
Selections/ modify/ expand by 5.
Layers/ new raster layer, layers/ arrange/ move down.
Copy your paper again and paste into selection,
Selections/ select none.
Effects/ plugins/ xero/ fritilliary


3.Activate top layer.
Copy AFL54,
paste as a new layer on your working image.
Layers/ arrange/ move down, Layers/ arrange/ move down again.
Position to your liking.
Copy AFL43, paste as a new layer,
Position at the top of the ivy to cover the top stem.
Image/ re-size, re-size to 350 pixels wide, all layers untabbed.
Move back to it's position.

4.Activate top layer.
Copy AFL60,
paste as a new layer on your working image.
Image/ re-size to 350 pixels wide, all layers untabbed.
Position to the left .
Erase any top part of the strings above the heart.
Layers/ arrange/ move down, Layers/ arrange/ move down again.
Layers/ duplicate, Image/ mirror,
Layers/ arrange/ move down, repeat the move down until this element
is above the layer with the mask but below the ivy.
Erase any top part of the strings above the heart.

5.Copy AFL17,
Activate the layer with the mask.
Paste as a new layer,
image/ re-size, re-size to 450, all layers untabbed.
Effects/ 3D effects/ Inner Bevel
Bevel #1, Width 8, Smoothness 0, Depth 1, Ambience 0, Shininess,
Colour #FFFFFF, Angle 315, Intensity 50, Elevation 30


6.Activate your top layer.
Copy your tube, paste as a new layer.
Image/ re-size, re-size to 450 pixels wide,
all layers untabbed.

7.Add a drop shadow of choice to any layer of your choosing.
I am using H3, V3, O65, B7, colour #000000
on all layers except the layer with the mask.

8.Activate your top layer.
Layers/ new raster layer.
Add your copyright info and any text.
Layers/ merge/ merge visible.
File export and save as a transparent png.

Chains
Tutorial written by and © to Bits N Bobs 27th December 2011.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Charlemagne Std
Tube of  choice.
I am using  one  by Marc Lambrette
Mine is MA0037 - The White Witch and available at UpYourArt
Tube is not to be used without the correct licence.
Scrap kit Crime Scene by Bits N Bobs
Items I have used from this kit are...
Paper2, CS7, CS11, CS55,
Plugin AAA frames foto frame

Note
This tutorial was written in PSP 9.
Open all supplies in paintshop except the font
Double click on your font and minimize.
Open a new image 600x250 at 72 pixels per inch.

1.Open paper 2,
Re-size to 40% all layers tabbed.
Activate your working image,
flood fill with your paper 2.

2.Copy CS55, paste as a new layer.
Image/ re-size, 70 all layers un-tabbed.
Layers/ duplicate, Layers/ merge/ merge down.
Layers/ duplicate, Layers/ merge/ merge down.
Position towards the bottom.
Layers/ duplicate, image/ flip.
Layers/ merge/ merge down.

3.Copy CS7, paste as a new layer.
Position on the left hand side.
Activate CS11, re-size to 40% all layers tabbed.
Copy, paste as a new layer.
Position on the left hand side.
Add a drop shadow of choice.
I am using I use V3, H3, O100, B7.00, colour black.

4.Activate your tube.
If using the same as me for a smoother look I have added noise reduction as follows.
Adjust/ photo fix/ Digital camera noise removal, settings as below.


5.Copy your tube, paste as a new layer.
Position to your liking.
Effects/ texture effects/ mosaic antique, settings below in screenshot.

Layers/ properties, adjust the blend mode to Luminance (Legacy)

6.Layers/ merge/ merge visible
Effects/ plugins/ AAA Frames/ Foto frame


7.Copy your tube, paste as a new layer.
Position to your liking.
Add same drop shadow as before.
Layers/ new raster layer.

8.Open a new image 150 x 150 for your avatar.
Copy your merged signature.
Paste as a new layer onto your avatar image.
Position to your liking,
Layers/ merge/ merge visible.
Effects/ plugins/ AAA Frames/ Foto frame
Same settings as before but change the width
from 10 to 5.

9.Add all of your copyright info to both,
add your name and save.

Crime Of Passion
Tutorial written by and © to Bits N Bobs 27th December 2011.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Charlemagne Std
Tube of  choice.
I am using  one  by Guy Powers
Mine is GP0059 - Tina Handcuffed and available at UpYourArt
Tube is not to be used without the correct licence.
Scrap kit Crime Scene by Bits N Bobs
Items I have used from this kit are...
Paper 5, CS56, CS14, CS11
Mask of choice. I am using mask 50 by Gabee

Note
This tutorial was written in PSP 9.
Open all supplies in paintshop except the font and Mask.
Double click on your font and minimize.
Install your mask and plugins.
Open a new image 550x550 at 72 pixels per inch.

1.Re-size paper 5 to 530 pixels,
copy and paste as a new layer onto your working image.
Layer/ Load-save mask/ load from disk,
Look for your mask image and with the settings below click load.
Layers/ merge / merge group.


2.Image/ Canvas size/ 600 x 600 in the center.
Copy CS56, paste as a new layer.
Re-size 90 all layers un-tabbed.
Layers/ arrange/ send to bottom.
Layers/ duplicate, Image/ mirror.
Layers/ merge/ merge down.

3.Copy CS14 and paste as a new layer.
Re-size 105 all layers un-tabbed.
Activate your top layer.

4.Copy your tube and past as a new layer.
Image re-size, 90 all layers un-tabbed.
Positon to your liking.
Add a drop shadow of choice.
I use V3, H3, O100, B7.00, colour black.

5.Copy CS11, paste as a new layer.
Image/ re-size 25 all layers un-tabbed
position to your liking.
Mine is in the bottom right corner.
Add a drop shadow of choice.
I use V3, H3, O100, B7.00, colour black.
Layers/ duplicate, Image/ mirror, Image/ flip.
Re-size 50 all layers un-tabbed.
Position to your liking.
I have put mine on her butt.
Layers/ merge/ merge visible.

6.Add a new raster layer.
Add all copyright info, your name and save.