Monday, 5 February 2018

Updating old tutorials

Morning everyone,

I have found my old hard drive with my DVP tutorials and will be updating them all so if there are any you would like to see update first be sure to reply to this so I know :)

Wednesday, 31 January 2018

Forever love 2



Forever Love 2
Tutorial written by and © to Bits N Bobs 31st January 2018.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You may add a link for this tutorial on your forum etc.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Daily grind
Tube of  choice.
I am using Cupids Bow by Bits N Bobs   available here at W4E
Tube is not to be used without copyright credit
Masks of choice.
I am using Vix_Mask363 by Vix  available here

Scrap kit Forever Love here by Bits N Bobs
I am using Paper 10 and Elements 2, 9, 12, 68, 71, 72, 73, 74, 77,

Plugins required (optional)
Plugin - Penta.com dot and cross ( Garbage collection)


Note

This tutorial was written in PSP 9 and
uses animation shop 3 for animation.
Open all supplies in paintshop except the font.
Double click on your font and minimize.
Add your mask to your mask folder.

Open a new image 600 X 600 at 72 dpi

1. Activate and copy paper 10.
Activate your working image.
Edit/ paste as a new layer.
Layers/ Load/Save mask, Load mask from Disk,
scroll through and select your mask.
Tab Source Luminance, Fit to canvas, hide all mask.












Layers/ merge/ merge group.
Effects/ plugins/ penta.com/ Dots and cross
Amount:72 Cross distance:10 Cross width:2

Layers/ merge/ merge visible.


2. Copy element 68.
Paste as a new layer.
Image/ re-size to 500 pixels wide,
all layers un-tabbed.

3. Copy and paste your tube.
Image/ re-size to 400 pixels wide,
all layers un-tabbed.
Cut away below the knees.
Position towards the left.
Activate your frame layer.
Selections/ select all,
Selections/ float,
Selections/ defloat,
Activate your tube layer,
use your eraser to cut away your tube on the frame bottom.
Activate your tube layer,
Selections/ select none.
Now erase the rest of her legs at the bottom.
Add a dropshadow of choice to both layers.
I have used V3 H3 O40 B7 Colour #000000

4. Activate your bottom layer.
Copy element 71.
Paste as a new layer.
Image/ re-size to 350 pixels wide,
all layers un-tabbed.
Position towards the top left.
Layers/ duplicate, Image/ mirror.
Layers/ merge down.
Layers/ duplicate,
Position towards the bottom right.
Layers/ merge down.
Add your drop shadow.

5. Activate your bottom layer.
Copy element 74.
Paste as a new layer.
Image/ re-size to 180 pixels high,
all layers un-tabbed.
Position towards the right
Add your drop shadow.

6. Copy element 12.
Paste as a new layer.
Image/ re-size to 340 pixels wide,
all layers un-tabbed.
Position towards the bottom left corner.
Add your drop shadow.

7. Copy element 73.
Paste as a new layer.
Image/ re-size to 180 pixels wide,
all layers un-tabbed.
Position towards the bottom right corner.
Add your drop shadow.

8. Copy element 77.
Paste as a new layer.
Image/ re-size to 150 pixels wide,
all layers un-tabbed.
Position towards the bottom.
Add your drop shadow.

9. Copy element 72.
Paste as a new layer.
Image/ re-size to 150 pixels wide,
all layers un-tabbed.
Position towards the top right corner.
Add your drop shadow.

10. Copy element 2.
Paste as a new layer.
Image/ re-size to 300 pixels wide,
all layers un-tabbed.
Position towards the bottom.
Add your drop shadow.

11. Copy element 9.
Paste as a new layer.
Image/ re-size to 150 pixels wide,
all layers un-tabbed.
Position towards the  top left corner.
Activate and use your raster deform tool to turn your element.
Layers/ duplicate, Image/ mirror,
position towards the right side middle.
Layers/ merge/ merge down.
Add your drop shadow.

12. Add all copyright info.
Export and save as a transparent png


Matching AV

13. For a matching AV open a new image
180 x 180 and 72 dpi.
Copy your tag and paste as a new layer.
Position to your liking.

Add copyright info and name,
export as jpg and save.


Monday, 29 January 2018

Forever love forum set tutorial


Forever Love
Tutorial written by and © to Bits N Bobs 29th January 2018.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You may add a link for this tutorial on your forum etc.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Midnight Legend http://www.dafont.com/midnight-legend.font
Tube of  choice.
I am using the one from the kit by Bits N Bobs  available here at Wilma4Ever
Mask of choice.
I am using Vix_Mask448 by Vix  available in the supplies file

Scrap kit Forever Love by Bits N Bobs

 I am using Papers 8 and 9 and Elements 3, 7, 12, 71, 72 and 80

Plugins required (optional)
Plugin - Penta.com dot and cross ( Garbage collection)

Note
Download extra supplies here

This tutorial was written in PSP 9 and
uses animation shop 3 for animation.
Open all supplies in paintshop except the font.
Double click on your font and minimize.
Add your mask to your mask folder.

Open a new image 600 X 250 at 72 dpi

1. Activate and copy paper 8.
Activate your working image.
Edit/ paste as a new layer.
Activate and copy paper 9.
Activate your working image.
Edit/ paste as a new layer.
Layers/ Load/Save mask, Load mask from Disk,
scroll through and select your mask.
Tab Source Luminance, Fit to canvas, hide all mask.


Layers/ merge/ merge group.
Effects/ plugins/ penta.com/ Dots and cross
Amount:72 Cross distance:10 Cross width:2

Layers/ merge/ merge visible.

2. Copy element 71.
Paste as a new layer.
Image/ re-size to 500 pixels wide,
all layers un-tabbed.
Add a dropshadow of choice.
I have used V3 H3 O40 B7 Colour #000000















3. Copy element 3.
Paste as a new layer.
Image/ re-size to 250 pixels wide,
all layers un-tabbed.
Position to the top left corner
Add your drop shadow.

4. Copy element 7.
Paste as a new layer.
Image/ re-size to 150 pixels wide,
all layers un-tabbed.
Position to the bottom left corner
Add your drop shadow.

5. Copy element 72.
Paste as a new layer.
Image/ re-size to 100 pixels wide,
all layers un-tabbed.
Position towards the top
Add your drop shadow.

6. Copy element 12.
Paste as a new layer.
Image/ re-size to 240 pixels wide,
all layers un-tabbed.
Position towards the bottom
Add your drop shadow.

7. Copy your tube (element 80).
Paste as a new layer.
Image/ re-size to 400 pixels wide,
all layers un-tabbed.
Position towards the bottom right corner
Add your drop shadow.
Layers/ merge/ merge visible.
Adjust/ sharpness/ sharpen

8. Layers/ new raster layer.
Click on your forground pallette and pick a
colour from your tag for your border.
I have chosen #7bc4c2
Floodfill with your chosen colour.
Selections/ select all, Selections/ float, Selections/ defloat
Selections/ modify/ contract by 5
Edit/ cut, Selections/ select none.

9. Add all copyright info.
Export and save as a jpg

Matching AV

10. For a matching AV open a new image
180 x 180 and 72 dpi.
Copy your tag and paste as a new layer.
Position to your liking.
Layers/ new raster layer
Floodfill with your chosen colour.
Selections/ select all, Selections/ float, Selections/ defloat
Selections/ modify/ contract by 3
Edit/ cut, Selections/ select none.
Add copyright info and name,
export as before and save.