Autumn Bouquet
Tutorial written by and © to Bits N Bobs 15th November 2021.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Boshela from Dafont

Tube of  choice.
I am using the one included in the kit.

Scrap kit Autumn Bouquet by BitsNBobs
https://mysticalscraps.com/index.php?main_page=index&cPath=7_433

Items I have used are...
Elements 73, 74, 76, 77, 79, 80, 83, 86,  
Paper 5

Mask of choice.
I am using Mask 0300 from here by Simone
Leaf Animation available here
created by Lovey's Animations


Note
This tutorial was written in PSP 9.
Double click on your font and minimize.
Open all other supplies in paintshop.
Open a new image 700 wide X 700 high at 72 dpi

1. Selections/ select all.
Open your paper,
Copy, paste into selection, select none.
Close paper.
Open your chosen mask and crop it if needed.
You want the mask to fill the whole paper so no blank sides.
Once done minimize and go back to your working image
Layers/ new mask layer/ from image and select your mask.
Layers/ merge/merge group

Copy and paste elements to your liking or follow below for mine.

2. Copy E86, paste as a new layer.
Image/resize 61%,  all layers untabbed.
Add a drop shadow.
I am using...
V 3 - H 3 - O 70 - B 7 - Colour #000000

Copy E74, paste as a new layer.
Image/resize 81%,  all layers untabbed.
Add same drop shadow.
Position towards bottom center.

Copy E73, paste as a new layer.
Image/resize 41%,  all layers untabbed.
Add same drop shadow.
Position towards bottom left.

Copy E83, paste as a new layer.
Image/resize 30%,  all layers untabbed.
Add same drop shadow.
Position towards bottom right.
Layers/ arrange/ mmove down x 2.

Copy E77, paste as a new layer.
Image/resize 30%,  all layers untabbed.
Add same drop shadow.
Position towards bottom slightly on the right.
Activate your top layer.

Copy E80, paste as a new layer.
Image/resize 33%,  all layers untabbed.
Add same drop shadow.
Position towards the left and stand on the pumpkin.

Copy E79, paste as a new layer.
Image/resize 33%,  all layers untabbed.
Add same drop shadow.
Position towards the right and stand on the tree stump.
Activate your frame layer.

Copy E76, paste as a new layer.
Image/resize 59%,  all layers untabbed.
Image/ mirror
Add same drop shadow.
Position towards the right side.

3. Copy your tube and paste as a new layer.
Image/resize 31%,  all layers untabbed.
Add same drop shadow.
Position towards the left side.


If you don't want the animation then add your
 copyright, name and export as a transparent PNG.

4. To animate we first need to prepare our file.
Activate the top layer and add any copyright Info.
Also add your name unless saving as a blank for tag offers.
Close all layers except the frame and paper(mask) layer.
Edit/ copy merged.
Open animation shop.
Edit/ paste/ paste as new animation.
Edit/ copy
Edit/ paste/ paste after current animation.
We now have 2 frames.
Our leaf animation has 30 frames so we need to add more.
Press Shift+Ctrl+L until you have a total of 30 frames.
Alternatively Edit/ paste/ paste after current animation until you reach the 30 frames.
Edit/ Select all
Edit/ propogate paste

Open the leaf animation in animation shop.
Edit/ select all
Edit/ Copy.
Go back to your tag frames by clicking on the top border.
Be sure all the frames are still highlighted.
If not Edit/ select all.
Edit/ paste into selected frames.
Position your pointer towards the top left so it is just below the frame.

 

 

 

 

 

 

 

 

View/ Animation
Because you can't see the animation before you paste it you may need to try a couple of times for positioning.
Just Edit/ undo paste and then redo it until you have the correct position.

Don't close anything.
Now go back to Paintshop

Close your open layers and reopen your closed layers.
Edit/ copy merged.

Go back to animation shop.

Edit/ paste as new animation.
Edit/ Copy
Activate your main animation again by clicking on the top border.
Make sure all frames are highlighted.
If not Edit/ select all.
Edit/ paste/ paste into selected frame.
Position to your liking.
Remember to leave a little gap at the bottom.

View/ Animation, hopefully you can see the falling leaves ;)
File/ save as

Customize then follow the screen shots for my settings.

 

 

 

 

 

 

Click OK.
If you want to save these settings for transparent ani tags click the box.
I don't because I find it varies with different tags but these are goo for this one.
Click next until done and Voila.

If you saved this as a blank then to add your name just create it in paintshop.
Edit/ Copy merged

Open animation shop.

Edit/ paste as a new animation.
Edit/ copy

Open your tag.
Edit/ select all.
Edit/propogate paste.
Edit/ paste into selected frame.

Then edit/ save as and follow the same steps as before.

 Thought it was about time I gave the tut blog a makeover.

Things may look hinky for a little while so please bear with me.

It hasn't been changed for years so deserves a little TLC lol

 

 Steampunked
Tutorial written by and © to Bits N Bobs 25th August 2021.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Candle Script demo
Tube of  choice.
I am using Marianne by Chris Pastel
Scrap kit Steampunked by BitsNBobs
Available HERE for free at the time of writing this tutorial
Items I have used are...
Elements 1, 17, 18, 36, 39,  
Paper 8


Mask of choice
I am using Vix-mask481 by Vix you can download this HERE
Plugin Filter 

Garbage collections Pentacom Dot and Cross HERE
https://www.mediafire.com/file/hgj80b3a09t276w/mmCopies13.zip/file

Note
This tutorial was written in PSP 9.

Install any filters/plugins
Double click on your font and minimize.
Open all other supplies in paintshop.
Open a new image 800 wide X 800 high at 72 dpi

1. Selections/ select all.
Open your paper,
Copy, paste into selection, select none.
Close paper.
Open your chosen mask and crop it.
You want the mask to fill the whole paper so no blank sides.
Once done minimize and go back to your working image
Layers/ new mask layer/ from image and select your mask.
Layers/ merge/merge group
insert ss1

2. Copy E1, paste as a new layer.
Add a drop shadow.
I am using...
V 3 - H 3 - O 70 - B 9 - Colour #000000
insert ss2
Arrange your element to your liking.
I have left mine as is.

3. Copy and paste E39,
Using your magic wand select the blank spaces of the frame.
Hold down your shift key whilst doing so as there are more than one.
Selections/ modify/ expand by 15
Layers/ new raster layer
Flood fill with your colour of choice.
I am using #a66a45
Lyers/ arrange/ move down.
Selections/ select none.
Effects/ pentacom/ dots and cross
Amount: 134  Distance: 11  Width:  2
insert ss3
Layers/ properties/ blend mode/ screen
Opacity: 100, link set: 0, layers visible: checked

4. Activate your top layer.
Now to add some elements.

Copy E18, paste as a new layer.
Image/ resize 55% all layers untabbed.
Adjust/ Sharpness/ sharpen
Position to your liking.
Mine is in the bottom right corner.
Layers/ duplicate, Image/ flip, Image/ mirror
Layers/ merge/ merge down.
Add your drop shadow.

Copy E17, paste as a new layer.
Position to your liking.
Mine is in the top right corner.
Add your drop shadow.

Copy E36, paste as a new layer.
Image/ resize 55% all layers untabbed.
Adjust/ Sharpness/ sharpen
Position to your liking.
Mine is in the bottom left corner.
Add your drop shadow.

5. Be sure your top layer is active.
Copy your tube and paste as a new layer.
Image/ resize 55% all layers untabbed.
Adjust/ Sharpness/ sharpen
Position to your liking.
Mine is in the center.
Add your drop shadow.
Erase the bottom part of your tube so it looks like she is
popping out of the frame.

6. For your name, activate top layer.
I have used Candlescript Demo at size 65,
colour #e99baa
Export and save in your chosen format.
I use a transparent png.

If you just want this tag you are finished.
If you want an AV continue.

7. For your avatar open a new image,
180 x 180 at 72 dpi.
Copy your tag, paste as a new layer.
Position to your liking.
Layers/ merge/ merge visible.
Add your copyright info, initial and then save.

The perfect Winter

 
Tutorial written by and © to Bits N Bobs 19th August 2021.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Boshela
Tube of  choice.
I am using the one included in the kit.
Scrap kit The perfect Winter by Creative Scraps by Crys
Available here for free at the time of writing this tutorial

A truly beautiful Kit created for a Truly beautiful woman, Tonya.

Missed by so many in the tagging world but especially those at Misfits.

Items I have used are...
Elements 1, 3, 7, 24, 26, 47, 62, 96, 99 wordart 2,
Paper 3


Mask of choice
I am using Vix-Winter20-Mask1 

 
Plugin Filter
Muras Meister Copies download here


Note
This tutorial was written in PSP 9.
Double click on your font and minimize.
Open all other supplies in paintshop.
Open a new image 800 wide X 800 high at 72 dpi

1. Selections/ select all.
Open your paper,
Copy, paste into selection, select none.
Close paper.
Open your chosen mask and crop it.
You want the mask to fill the whole paper so no blank sides.
Once done minimize and go back to your working image
Layers/ new mask layer/ from image and select your mask.
Layers/ merge/merge group
insert ss1

2. Copy E62, paste as a new layer.
Image/resize 23%,  all layers untabbed.
Copy wordart 2, paste as a new layer.
Image/resize 5%,  all layers untabbed.
Position to the center of the flower
Add a drop shadow.
I am using...
V 0 - H 0 - O 80 - B 7 - Colour #000000
Lerys/ merge/ merge down
Effects/ Plugins/ Muras meister/ copies
Settings:
Shift mode/ Circle,
Tile mode/ Wraparound,
Blend mode/ Normal,
15, 50, 50, 0, 0, 0, 100, 0, 100, 0, 0, 30, 0
See screenshot below
insert ss2
Add a drop shadow.
I am using...
V 3 - H 3 - O 70 - B 9 - Colour #000000
Your flower frame should be automatically centered
but feel free to move it to your liking.

3. Now to add some elements.
Copy and paste element 96,
Layers/ arrange/ move down.
Position to the left.
Layers/ duplicate,
Image/ Mirror, Image/ flip.
Layers/ arrange / move down.
Using your eraser or selction tool,
remove any of the element from the center of the frame.
Layers/ merge/ merge down.

4. Activate your top layer.
Copy Element 1, paste as a new layer.
Image/ resize 69% all layers untabbed.
Adjust/ Sharpness/ sharpen
Position to your liking.
Mine is towards the left.
Add your drop shadow.
Copy element 2, paste as a new layer.
Position to your liking.
Mine is on the right hand side.
Add your drop shadow.
Copy element 99, paster as a new layer.
Position to your liking.
Mine is towards the right slightly.
Copy Element 3, paste as a new layer.
Image/ resize 31% all layers untabbed.
Position to your liking.
Mine is on her hand.
Erase the string on the star.
Add your drop shadow.

5. Copy and paste element 26 and resize to 31%
Position by the tubes feet.
Add your dropshadow.
Copy and paste element 24 and resize to 31%
Position at the base of the tree on the left.
Add your dropshadow.
Copy and paste element 86 and resize to 57%
Position at the bottom on the left corner.
Layers/ duplicate, Image/ Mirror, Layers/ Merge/ merge down.
Add your dropshadow.
Layers/ Arrange/ move down.
Keep moving down until it is below your tube layer.
Copy and paste element 47 and resize to 57%
Position at the bottom in the center to cover the gap.
Add your dropshadow.
Copy and paste element 98,
Layers/ duplicate,
Layers/Arrange/ Merge, merge down.
Copy and paste element 7 and resize to 39%
Adjust/ Sharpness/ sharpen.
Position to the bottom left corner of your tube.
Add your dropshadow.

6. Activate your top layer.
Copy and paste your wordart 3,
Resize it to 41%.
Adjust/ Colour balance/ Manual Colour correction.
Target #e292a2 Source #f4efdd
Layers/ Duplicate, Layers/ Merge/ Merge down.
Position to your liking.
Mine is in the center.
Layers/ Arrange/ Move down.
Repeat until it is 1 layer above your snow flurries.
I haven't added a drop shadow but it is your choice.

7. For your name, activate top layer.
I have used Boshela at size 48,
colour #e99baa in stroke and fill.
Stroke width 1, antialias smooth.
put it below the wordart.

Export and save in your chosen format.
I use a transparent png.

If you just want this tag you are finished.
If you want the set continue.

8. Open a new image,
700 x 250 at 72 dpi.
Now it is just a case of copying images from your main tag image
(remember you didn't merge it) and placing them wherever you want.
Here is mine.

Flood fill with #e290a0
Selections/ all, Selections/ Float, Selections/ defloat
Selections/ modify/ contract by 5, flood fill with #FFFFFF
Selections/ modify/ contract by 3, flood fill with #e290a0
Selections/ modify/ contract by 1, Edit/cut

Layers/ new raster layer, Arrange/ layers/ move down, floodfill #FFFFFF
Copy the background from your tag, paste as a new layer,
Layers/ duplicate, layers/ Merge/ merge down.
Position in the bottom left corner so the top laft corner of the background is showing
Layers/ duplicate, Image/ Mirror, layers/ Merge/ merge down.

Copy your penguin, paste and position in the bottom right corner.
Copy your cat, paste and position in the bottom left corner.
Copy your tube, paste and position in the center and slightly to the right.
Copy your winter wonderland wordart, paste and position at the bottom between the tube and the penguin.
adjust the layers blend mode to Dodge.
Copy your frame, paste and position on the left hand side,
adjust the layers blend mode to Overlay.
Layers/ Duplicate, Image/ mirror, layers/ Merge/ merge down.
 
Add your copyright info, add your name using
the same settings as step 7 of the tag, then save as you did your tag.


8. For your avatar open a new image,
180 x 180 at 72 dpi.
Copy your tag, paste as a new layer.
Position to your liking.
Layers/ merge/ merge visible.
Add your copyright info, initial and then save.

 

Christmas Marie
Tutorial written by and © to Bits N Bobs 6th July 2021.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.

Download my supplies HERE including the mask

Font of choice for your name.
I am using Rage Italic from FontsGeek here
Tube of  choice.
I am using Marie is coming by Jenny here
Tube is not to be used without the correct licence.

Mask of choice
I am using mask Christmas 5 by Essex girl (in the supply zip)

Note
This tutorial was written in PSP 9.
Double click on your font and minimize.
Open all other supplies in paintshop.
Open a new image 650 wide X 650 high at 72 dpi

1. Selections/ select all, Selections/ modify,
Selections/ modify contract by 30.
Copy your tube, paste into selection.
Effects/ Dsb flux/ Central mirror, Mirrors 9, Rotation 147
Selections/ modify/ expand by 15.
Layers/ new raster layer.
Flood fill with a colour from your tube.
I have chosen #1d5837
Layers/ arrange/ move down.
Selections/ select none.
Layers/ new mask layer/ from image and select your mask.
Layers/ merge/merge group/ merge visible

Activate your filtered tube layer and change the blend mode to lighten.
Lower the layer opacity to 75%

2. Copy and paste your tube as a new layer.
Position to your liking, mine is on the right hand side.
Add a drop shadow.
I am using...
V 3 - H 3 - O 80 - B 7 - Colour #000000

3. Activate your filtered tube layer,
Copy the fireplace, paster as a new layer.
Position up and to the left slightly.
Add the same drop shadow as before.
Copy Noel element, paste as a new layer.
Layers / resize to 41%, position on the to of the fireplace.
Add the same drop shadow as before.

4. Layers/ new raster layer.
Add your copyright info and name
export and save in your chosen format.
I use a transparent png.

5. For your avatar open a new image,
180 x 180 at 72 dpi.
Copy your tag, paste as a new layer.
Position to your liking.
Layers/ merge/ merge visible.
Add your copyright info, initial and then save.

 

Wonder of Alice
Tutorial written by and © to Bits N Bobs 3rd July 2021.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Alice in Wonderland from Dafont HERE

Tube of  choice.
I am using Alice in Wonderland by Dilara HERE

Tube is not to be used without the correct licence.
Scrap kit Alice by Wicked Diablo HERE
Items I have used are...
Elements 6, 7, 8, 20, 47, 48, 52, 59, 60,
Paper 1

Mask of choice
I am using cornered octagon by Essex Girl My supplies download HERE
Wording in the same zip file as the mask.

Note
This tutorial was written in PSP 9.
Double click on your font and minimize.
Open all other supplies in paintshop.
Remember to save your work regularly so you don't lose it.
Open a new image 650 wide X 650 high at 72 dpi

1. Selections/ select all.
Open your paper,
Copy, paste into selection, select none.
Close paper.
Layers/ new mask layer/ from image and select your mask.
Layers/ merge/merge group/ merge visible

2. Copy E7, paste as a new layer.
Image/ resize 75% position in the middle.
Add a drop shadow.
I am using...
V 3 - H 3 - O 80 - B 7 - Colour #000000
Copy your chosen tube and paste as a new layer.
Image/ resize 21% (all layers untabbed always)
position towards the bottom right hand side.
Add the same drop shadow as before.
Copy E20, paste as a new layer.
Image/ resize 29% and position so it looks like Alice is leaning on it.
Add the same drop shadow as before.

3. Now to add some more elements.
This is the longest part.
Copy E59, paste as a new layer.
Image/mirror, Image/ resize 19%
Position on top of the mushroom on the left of Alice.
Add the same drop shadow as before.
Copy E60, paste as a new layer.
Image/ resize 23%
Position to the left so i'ts pouring into the cup.
Add the same drop shadow as before.
Copy E6, paste as a new layer.
Image/mirror, Image/ resize 45%
Position to the left bottom corner.
Add the same drop shadow as before.
Copy E48, paste as a new layer.
Image/ resize 25%
Position to the right so it looks like it is coming out
of Alice's pocket and being held by the caterpillar.
Add the same drop shadow as before.

Copy E52, paste as a new layer.
Image/ resize 21%
Position to the right and layers/ arrange/ move down
until it is below the tube layer and position behind
the caterpillar.
Add the same drop shadow as before.
Copy E47, paste as a new layer.
Image/ resize 21%
Position ontop of the mushroom behind the teapot and cup
Add the same drop shadow as before.
Copy E8, paste as a new layer.
Image/ resize 27%
Position behind the rabbit.
Layers/ duplicate layer, Image/mirror.
Turn off your tube layer for this next part.
Move the right roses up slightly so it's not
 in the keyhole of the book.
Turn your tube layer back on.
Right rose layer, Layers/ merge/ merge down.
Layers/ arrange/ move down X 2
Add the same drop shadow as before.
Copy E8 again,  paste as a new layer.
Image/ resize 27%
Position towards the top left corner,
Layers/ duplicate layer, layers/ arrange/ move down X2.
Image/mirror layers/ merge/ merge down.
Add the same drop shadow as before.

5. Copy the wording file and paste as a new layer.
Position to your liking.
Mine is at the top center.
Layers/ properties, change the blend mode to Lighten.

DO NOT MERGE

6. Layers/ new raster layer.
Add your copyright info.

7. For your name.
Use font Alice in Wonderland, size 48 colour #f50203.
Layers/new raster layer.
Add your name, selections/modify/ expand by 3,
layers/new raster layer flood fill with white, #FFFFFF
Layers/ arrange/ move down.
Selections/modify/ expand by 1
layers/new raster layer flood fill with blue, #0058af
Layers/ arrange/ move down.
Selections/ select none.
Add the same drop shadow as before.
Active your red name layer,
Layers/ merge/ merge down X2
Layers/ properties, change the blend mode to Lighten.
Export and save in your chosen format.
I use a transparent png.

If you just want this tag you are finished.
If you want the set continue.

8. Open a new image,
600 x 250 at 72 dpi.
Now it is just a case of copying images from your main tag image
(remember you didn't merge it) and placing them wherever you want.
Here is mine.

9. Copy your top corner rose layer, paste as a new layer.
Posiotion to top left corner.
Layers/ duplicate/ duplpicate layer, Image/ mirror
Layers/ merge/ merge down. Layers/ duplicate, Image/ flip.
Layers/ merge/ merge down.
Add the same drop shadow as before.
Copy your rabbit layer, paste as a new layer.
Image/resize 65% position to the left.
Layers/ duplicate, Image/ mirror.
Copy Alice layer, paste as a new layer.
Image/resize 65% position to the left.
Copy your wording layer, paste as a new layer.
Position slightly towards the top center.
You want to be able to see the rabbit faces.
Activate your rabbit layer.
Copy your small cards, paste as a new layer.
Position in the center.
Copy your teacup, paste as a new layer.
Position towards the bottom.
Copy your teapot, paste as a new layer.
Position towards the bottom.
Now position your teacup and teapot so the are more central at the bottom.
Copy your cake layer, Image/ resize 39% position the the left of the teapot.
Layers/ duplicate, position to the right of the teacup.

10. Add your copyright info, add your name using
the same settings as step 7. then save as you did your tag.

11. For your avatar open a new image,
180 x 180 at 72 dpi.
Merge your first tag.
Copy your tag, paste as a new layer.
Position to your liking.
Layers/ merge/ merge visible.
Add your copyright info, add your initial using
the same settings as step 7. then save as you did your tag.

If you followed this whole tutorial thank you it took me forever to write it lol

 

Beautiful Mermaid
Tutorial written by and © to Bits N Bobs 1st July 2021.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Sun Sea Sand from Dafont 

Tube of  choice.
I am using Beautiful Mermaid by Alex Prihodko 

Tube is not to be used without the correct licence.

Plugins
Graphnet plugins Funhouse available here

and DSB Flux available here 

Note
This tutorial was written in PSP 9.
Double click on your font and minimize.
Open all other supplies in paintshop.
Open a new image 600 wide X 250 high at 72 dpi

1. Selection a colour from your tube and flood fill your image.
I am using #d1f9fe
Copy and then paste your tube onto your working image.
Position all the way to the right so just her tail is in your image.

Layers/duplicate, Image/mirror, Layers/merge/merge visible.
Effects/ plugins/ Funhouse/ Radial mirror (see screenshot below) 

Effects/ plugins/ Funhouse/ Ring tile (see screenshot below)

 

 

 

2. Copy and then paste your tube onto your working image as a new layer.
Position to your liking, see screenshot below for mine.

Add a drop shadow.
I am using...
V 3 - H 3 - O 80 - B 7 - Colour #000000 (see screenshot below) 

Effects/ plugins/ DSB Flux/ Bubbles
10, 73, 21, 79 (see screenshot below)

Change your layers blend mode to hard light.

3. Copy and then paste your tube onto your working image as a new layer.
Image/ resize 35% all layers untabbed.
Position to your liking, mine is on the left.
Add a drop shadow using the same settings.

4. Copy and then paste your tube onto your working image as a new layer.
Position to your liking, mine is on the right.
You want her face taking up the right side of the tag.
Add a drop shadow using the same settings.
Change the layer blend mode to hard light and the layer opacity to 70%

5. Layers/ new raster layer.
Flood fill with a colour from your tube.
I am using #4cd8ef
Selections/select all, Selections/float, Selections/ defloat, Selections/ modify/ contract by 3,
flood fill with white #FFFFFF
Selections/ modify/ contract by 2, flood fill with the colour you selected mine is #4cd8ef
Selections/ modify/ contract by 1, hit delete on your keyboard.
Selections/ invert/ add your dropshadow.

6. Layers/ new raster layer.
Add your copyright info and name
export and save in your chosen format.
I use a transparent png.

7. For your avatar open a new image,
180 x 180 at 72 dpi.
Copy your tag, paste as a new layer.
Position to your liking.
Layers/ merge/ merge visible.
Add your copyright info, initial and then save.

 

Celebrate July

 
Tutorial written by and © to Bits N Bobs 15th June 2021.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Sun Sea Sand from Dafont 

Tube of  choice.
I am using Summer is coming by Alex Prihodko 

Tube is not to be used without the correct licence.
Scrap kit Celebrate July by Bits N Bobs
Items I have used are...
Elements 2, 3, 4, 8, 13, 38, 55, 69,
Paper 76


Mask of choice
I am using mask0186 from Scrappybitoffun

Note
This tutorial was written in PSP 9.
Double click on your font and minimize.
Open all other supplies in paintshop.
Open a new image 600 wide X 600 high at 72 dpi

1. Selections/ select all.
Open your paper,
Copy, paste into selection, select none.
Close paper.
Layers/ new mask layer/ from image and select your mask.
Layers/ merge/merge group/ merge visible

 

 

 

 

 

 

2. Copy E69, paste as a new layer.
Position to your liking, I left mine as is.
Add a drop shadow.
I am using...
V 3 - H 3 - O 80 - B 7 - Colour #000000
and
V -3 - H -3 - O 80 - B 7 - Colour #000000
Copy E55 paste as a new layer.
Image/ resize 45% position towards the right hand side.
Layers/ duplicate, Image/ mirroy, Layers/ merge/ merge down
Add the same drop shadow as before.

 

 

 

 

 

 

 

 

 

3. Now to add some elements.
Copy E8, paste as a new layer.
Image/ resize 45% same settings
Using your raster deform tool rotate and position to your liking.
Mine is in the top left corner.
Add your drop shadow.
Copy E13, paste as a new layer.
Image/ resize 45% same settings
Using your raster deform tool rotate and position to your liking.
Mine is in the top right corner.
Add your drop shadow.

4. Copy and paste E4 and resize to 57%
Position in the middle and slightly to the right.
Add your dropshadow.
Copy and paste E2 and resize to 57%
Position in the middle to the bottom of the flower pot.
Add your dropshadow.

5. Copy and paste E3 and resize to 47%
Position in the middle so it will be slighty behind your tube in the next step.
Add your dropshadow.
Copy and paste E38 and resize to 66%
Positon to the bottom of the date block.
Add your dropshadow.

6. Now copy and paste your tube.
If using the same as me resize it 41%.
Position to your liking.
Mine is at the bottom towards the left.
Add your dropshadow.

7. Layers/ new raster layer.
Add your copyright info and name
export and save in your chosen format.
I use a transparent png.

8. For your avatar open a new image,
180 x 180 at 72 dpi.
Copy your tag, paste as a new layer.
Position to your liking.
Layers/ merge/ merge visible.
Add your copyright info, initial and then save.