Saturday, 16 January 2010

Stolen heart


Stolen heart
Tutorial written by and © to Bits N Bobs 16th January 2010.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Impact
Tube of  choice.
I am using Bee my Valentine from Pack 31 by Ismael Rac
This tube is not to be used without an AMI license
Template 20 from Paradise psp designs
Plugin Xero set 4 - Fritillary

Note
This tutorial was written in PSP 9
Open all the supplies in paintshop except the font.
Double click on your font and minimize.
More tuts at TUT STOP

1.Open the template.
Press shift + D to duplicate then close the original.
Would hate to save over it now wouldn't we ?.
Close off the copyright, Black rectangle and Red rectangle layers.
Activate the oval layer.
Effects /plug-ins / Xero/ Fritillary with the settings below.
They will remain the same for this tutorial.


2.Selections/ select all,  Selections/ float,  Selections/ defloat.
Selections/ modify/ expand by 3, Layers/ new raster layer.
Flood fill with white (#FFFFFF), Layers/ arrange/ move down.
Selections/ select none.
Add a drop shadow of choice.
My settings will remain the same throughout.
V 0, H 0, O 100, B 7.00, Colour #900000

3.Activate circle layer use your colour replacer tool and change the colour.
I have #808080 in the foreground and #7c0000 in the background.
Double right click on the circle to change the colour.
Effects /plug-ins / Xero/ Fritillary with the same settings.
Selections/ select all,  Selections/ float,  Selections/ defloat.
Selections/ modify/ expand by 3, Layers/ new raster layer.
Flood fill with white (#FFFFFF), Layers/ arrange/ move down.
Selections/ select none.
Add a drop shadow of choice.

4.Activate thin rectangle layer.
Effects /plug-ins / Xero/ Fritillary with the same settings.
Add a drop shadow of choice.

5.Activate black heart layer.
Re-size your tube if needed.
Copy and paste as a new layer.
Image/ mirror and add a drop shadow.
Activate white heart layer and add a drop shadow.
Activate word art layer and add a drop shadow.

6.Close of the background layer.
Layers/ merge/ merge visible.
Add all copyright info and your name, export as a transparent png file and save.

Thursday, 14 January 2010

A Saint or Sinner


Click tag to view animation
 

Saint or Sinner
Tutorial written by and © to Bits N Bobs 14th January 2010
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website,
DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name and text.
I am using Learning curves pro and Got Heroin
Tube of  choice.
I am using Cherished Angel by Ismael Rac
This tube is not to be used without an AMI license
Frame is here and is to be used for this tut only.
If you want it for anything else please purchase the script.
Thank you.

If the link is down contact me and I will re-activate it.
Alien skin xenofex2 (free demo available).
Note
This tutorial was written in PSP 9
Open all the supplies in paintshop except the font.
Double click on your font and minimize.
Open a new image 500 x 500 at 72 dpi
More tuts at TUT STOP

1. Re-size the frame to 450 pixels high, copy, paste onto your new image as a new layer.
2. Select the center with your magic wand,
selections/ modify/ expand by 3, layers/ new raster layer,
layers/ arrange/ move down, flood fill with a colour of your choice,
I am using 7C0000.
Adjust/ add/remove noise/ add noise with settings .....
Gaussian checked, Monochrome checked, Noise 35%
Layers/ new raster layer, Effects/ 3D Effects/ Cut out with settings...
V 0, H -1, O 70, Blur 44.55, Shadow #000000, Selections/ select none.
3. Activate your frame layer.
Copy and paste your tube as a new layer.
Add a drop shadow.
Settings will remain the same through out.
I am using V3, H3, O100, B13.00, C #000000
4. Activate your frame layer again.
Selections/ select all/ selections/ float, selections/ defloat.
Activate your tube layer and delete the bottom part over the frame.
Selections/ select none.
Erase any other parts of the tube remaining at the bottom so she looks like she is popping out the frame.
5. Activate your frame layer again and add a drop shadow.
6. Layers/ merge/ merge visible.
Add your text and all copyright info.
For Saint I used Learning curve pro font and Got Heroin for all other text and my name.
7. Using your magic wand set at 0 tolerance, antialias on,select any spots you want to sparkle on your tube.
I am going to select areas of her Jewellery.
Holding your shift key whilst doing this will allow you to select seperate areas.
When done press shift + D twice so you have 3 images.
8. On your first image Effects/  plugins/  alien skin xenofex 2 ,
use the same settings as in the screen shot below .
File/ save as, save as image 2.


9. On your second image Effects/  plugins/  alien skin xenofex 2 , use the same settings but hit the random seed button .
File/ save as, save as image 2.
10. On your third image Effects/  plugins/  alien skin xenofex 2 , use the same settings but hit the random seed button .
File/ save as, save as image 3.
11. Open animation shop.
File/ animation wizard then follow the screen shots clicking next after each one.
On the add image part browse to where you saved your files and add them all, click next then finish.
View/ animation then file/save as.

 
 
 

12. Create your name in paintshop as normal, copy the file and paste as a new animation into animation shop.
Copy the name in animation shop, activate your animation, edit/ select all, edit/ paste into selected frames and then file/save as.


Saturday, 2 January 2010

Happy New Year *


Happy New Year
Tutorial written by and © to Bits N Bobs 2nd January 2010.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website,
DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Kingthings wrote
Tube of  choice.
I am using sweet xmas 01 from Racs Pack 29
This tube is not to be used without an AMI license
Scrap kit by Bits N Bobs - A new beginning
This kit was free at the time of writing this tutorial.
Items used from this kit are.
Paper 4, Frame 6, Element 65, Element 19, Element 2,
Alien skin xenofex2 (free demo available).

Note
This tutorial was written in PSP 9
Open all the supplies in paintshop except the font.
Double click on your font and minimize.
Open a new image 500 x 500 at 72 dpi

1. Re-size frame 6 to 450 pixels wide, copy, paste onto your new image as a new layer.
Select the center of the frame, selections/ modify/ expand by 1.
2. Re-size paper 4 to 500 pixels wide, copy, paste as a new layer.
Selections/ invert, delete on your keyboard.
Layers/ arrange/ send to bottom, selections/ selection none.
Activate frame layer and add a drop shadow.
Settings will remain the same through out.
I am using V3, H3, O100, B9.00, C #000000
3. Re-size element 65 to 400 pixels high, copy, paste as a new layer.
Position to your liking.
Layers/ duplicate, image/ mirrror.
Layers/ merge/ merge down.
Layers/ arrange/ send to bottom and add a dropshadow.
4. Copy element 19 and paste as a new layer.
Activate frame layer.
Re-size element 2 to 250 pixels high.
Copy and paste over the bow on the frame.
5. Copy and paste your tube,
Activate the paper layer.
Selections/ select all, selections/ float, selections/ defloat, selections/ invert.
Activate your tube layer and erase the bottom and side parts of your tube.
You want it to look like she is poppong out the top of the frame.
Add your copyright info
6. Activate the paper layer.
Press shift and D twice. You will now have 3 files.
On the first one effects/  plugins/  alien skin xenofex 2 , use settings as in screen shot.
Repeat this for your next 2 files but hitting the random seed button on each one.


7. On your first image activate your tube layer and using your magic wand
set at 0 tolerance, antialias on,select any spots you want to sparkle on your tube.
Holding your shift key whilst doing this will allow you to select seperate areas.
Effects/  plugins/  alien skin xenofex 2 , use settings as in screen shot.
Layers/ merge/ merge visible.
File/ save as, save as image 1.


8. On your second image activate your tube layer and using your magic wand
set at 0 tolerance, antialias on,select any spots you want to sparkle on your tube.
Holding your shift key whilst doing this will allow you to select seperate areas.
Effects/  plugins/  alien skin xenofex 2 , use the same settings but hit the random seed button .
Layers/ merge/ merge visible.
File/ save as, save as image 2.
9. On your second image activate your tube layer and using your magic wand
set at 0 tolerance, antialias on,select any spots you want to sparkle on your tube.
Holding your shift key whilst doing this will allow you to select seperate areas.
Effects/  plugins/  alien skin xenofex 2 , use the same settings but hit the random seed button .
Layers/ merge/ merge visible.
File/ save as, save as image 3.
10. Open animation shop.
File/ animation wizard then follow the screen shots clicking next after each one.
On the add image part browse to where you saved your files and add them all, click next then finish.
View/ animation then file/save as.

 
 
 

11. Create your name in paintshop as normal, copy the file and paste as a new animation into animation shop.
Copy the name in animation shop, activate your animation, edit/ select all, edit/ paste into selected frame and then file/save as.

Friday, 1 January 2010

So cold


So cold
Tutorial written by and © to Bits N Bobs 29th December.
Results are for personal use only.
No monetry gain allowed and that includes placing them behind a paid or donation based membership area.
You are not allowed to share/forward or translate any of my tutorials or place them on any blog, website, DVD or anywhere else without my permission.
These tutorials are written from my own ideas and any similarities to any other tutorial is purely coincidental.
All tutorials are for those with a working knowledge of paintshop pro.
I reserve the right to amend these terms at any time.

Supplies needed.
Font of choice for your name.
I am using Prozac buzz
Tube of  choice.
I am using Its cold 01 from Pack 30 by Ismael Rac
This tube is not to be used without an AMI license
Scrap kit Stargazer ( bundle 10 ) by KatNKDA at AMI,
not to be used without an AMI license
Items I am using from this kit are ....
Element 40, element 36, element 06

Note
This tutorial was written in PSP 9
Open all the supplies in paintshop except the font.
Double click on your font and minimize.

1.Open a new image 550 x 550 at 72 dpi.
Re-size element 40 to 500 pixels high, copy and paste as a new layer onto your new image.
2.Re-size your tube to 400 pixels high, copy, paste as a new layer.
Add a dropshadow of your choice.
Settings will remain the same throughout.
I use V 3, H 3, O 100, B 9.00, Colour #000000
3.Re-size element 36 to 400 pixels high, copy, paste as a new layer.
Layers/ Duplicate layer, image/ mirror, layers/ merge/ merge down.
Add a dropshadow of your choice.
4.Re-size your tube to 400 pixels high, copy, paste as a new layer.
Add a drop shadow of choice.
5.Re-size element 06 to 150 pixels high, copy, paste as a new layer.
Add a dropshadow of your choice.
Add your copyright info and name.
6.Activate element 40 ( raster layer 2 on mine )
Press Shift + D twice. You should now have 3 images the same.
On your first image, Adjust/ add/remove noise/ add noise with the following settings...
Random, Monochrome, noise 10
Layers/ merge/ merge visible
File save as, image 1
7.On your second image, Adjust/ add/remove noise/ add noise with the following settings...
Random, Monochrome, noise 12
Layers/ merge/ merge visible
File save as, image 2
8.On your third image, Adjust/ add/remove noise/ add noise with the following settings...
Random, Monochrome, noise 14
Layers/ merge/ merge visible
File save as, image 3
9.Open animation shop.
File/ animation wizard then follow the screen shots clicking next after each one.
On the add image part browse to where you saved your files and add them all, click next then finish.
View/ animation then file/save as.
 
 
 

10.Create your name in paintshop as normal, copy the file and paste as a new animation into animation shop.
Copy the name in animation shop, activate your animation, edit/ select all, edit/ paste into selected frame and then file/save as.